Cost is a key consideration in any project. This is especially true with custom finishes, which are susceptible to being value-engineered out of a project.
Our estimating team works every day to find ways for our systems to fit your budget. The more information that is available to us, the more likely we are to be able to help you deliver on spec, on time, and on budget.
So we can be as accurate as possible, these key pieces of information are needed:
Following are tips to help us to develop the most accurate proposal possible for your project. And if you’re not sure what solution is best for you, we can offer suggestions to help guide you to the options available.
The cost for panel systems will be determined by material substrate, thickness, perforation shape, size and spacing, as well as other factors such as additional finishing and fabricating services.
When placing your order, be sure to consider the following items:
State the number of sheets or square metres required.
Specify the thickness of the sheet material.
State the type of material required, i.e., MDF, plywood, fibre cement, plasterboard, etc. Then make sure to include the finish/laminate/colour etc. that you need.
Unless otherwise specified, the length is the long dimension of the sheet.
Use the following checklist items to describe your needs:
Specify the size of the hole/slot/etc.
Specify Square pitch, or Diamond pitch, etc.
This should be specified as the distance between hole centres.
Specify unperforated border to perimeter of the sheet.
Specify type of finish, colour, etc. If you have custom finishing ideas in mind, please contact us directly to discuss the possibilities for your project.
Every project has its own unique characteristics, so it is important to bear in mind that this information is a guide and is general in nature only. It is best to discuss your project in detail with your trained consultant at Decor Systems to ensure your proposal is comprehensive and accurate.
To obtain the most accurate proposal possible, please provide the following information when you submit your request:
We have additional capabilities that you should know about. Our knowledgeable, experienced professionals can provide recommendations, such as the best material or perforation pattern for your unique application. Additionally, Decor Systems offers full fabrication and finishing services, providing you all the benefits of a one-stop shop.